KUKA Error Message 1484 Wrong adhesive pressure

KUKA Robot Error Code 1484 Wrong adhesive pressure
Cause – The initial pressure of the adhesive is continuously monitored by the PLC during dispensing. A pressure value outside the permissible tolerance range has been detected. Possibly there are bubbles in the adhesive supply line, or the outlet nozzle is clogged.
Monitor – From the PCL application program (bonding technology).
Effect – Ramp-down braking, all active commands inhibited.
Remedy – Check the adhesive application hardware, purge it if necessary.


KUKA Error Message 1484 Wrong adhesive pressure