Haas CNC Alarm 652 U ZERO RET MARGIN TOO SMALL

Haas CNC Alarm 652 U ZERO RET MARGIN TOO SMALL
Alarm Description, Cause & Remedy
This alarm will occur if the home/limit switches move or are misadjusted. This alarm indicates that the zero return position may not be consistent from one zero return to the next. The encoder Z channel signal must occur between 1/8 and 7/8 revolution of where the home switch releases. This will not turn the servos off, but will stop the zero return operation.


Haas CNC Alarm 652 U ZERO RET MARGIN TOO SMALL