Haas CNC Alarm 640 (Mill) APC-MISSING PALLET @ REC

Haas CNC Alarm 640 (Mill) APC-MISSING PALLET @ REC
Alarm Description, Cause & Remedy
Pallet change sequence halted because receiver switch not activated. Pallet either unclamped or not on receiver. Ensure pallet is correctly located on receiver (against hard stop), then run M18 to clamp the pallet. After correcting the condition, run M50 to continue machining.


Haas CNC Alarm 640 (Mill) APC-MISSING PALLET @ REC