Haas CNC Alarm 609 (Lathe) TAILSTOCK RESTRICTED ZONE

Haas CNC Alarm 609 (Lathe) TAILSTOCK RESTRICTED ZONE
Alarm Description, Cause & Remedy
This alarm is caused by an axis moving into the tailstock restricted zone during program execution. To eliminate the problem, change the program to avoid the restricted zone or change Setting 93 or Setting 94 to adjust the restricted zone. To recover, go to jog mode, press Reset twice to clear the alarm, then jog away from the restricted zone.


Haas CNC Alarm 609 (Lathe) TAILSTOCK RESTRICTED ZONE